Below you can see our best range Pro Camera Poles and accessories for aerial photography and elevated photo inspection. Our telescopic camera masts can also be fitted with with a ballcam flex or boom arm for improved access and shots. We offer a full range of accessories and upgrades for our complete pole camera systems as well as valuable add-ons for those who wish to use ballcam or some of their own kit with our equipment.
All equipment has been designed and tested by our experienced in house team. Should you want something not displayed below please contact us and we'll be happy to help.
For info on our complete telescopic pole camera systems please see our main page here.
PK Rocketmast Telescopic Camera Pole
The Rocketmast is a self locking and lightweight elevated camera pole. Our telescopic camera poles are extendable and available in 5 reach lengths:
2 meters (6ft 5in)
5 meters (16ft)
8 metres (26 ft)
10 meters (33 ft)
12 meters (39 ft)
Select your required height from the drop down menu. If you need a camera mount or fitting please see below.
The telescopic camera poles are made of a lightweight fibre composite with the largest section being the housing for all other poles in the series. A rubber end cap is supplied to keep the internal poles secure. The pole extends a section at a time and each section is self locking. The largest (outer) pole is no longer than 1.2m when collapsed and so will fit into the vast majority of car boots. Designed for use with all our cameras but will also take other devices upto a maximum recommended weight of 350g.
The PK Pro Camera Boom extension arm is a lightweight accessory for our Camera Poles. Using it allows you to get to hard to see areas where using the main pole at an angle isn't possible. It is available in two lengths:
2 meters (6ft 5in)
5 meters (16ft 5in)
The Boom arm comes with a mount for the main pole and ideally should be used in 60:40 or at least 80:20 position so as to help counter balance each side making it easier to maneuver. All our camera mounts also fit the end of the boom arm.
PLEASE NOTE: This is the Boom Arm and mount bracket only. PK Pro Camera Pole is not included.
PK Screen Holder Telescopic Pole Mount
If you want to mount your PK monitor or receiver screen on the pole then the PK Screen Holder Mount is ideal.
The mount is adjustable to fit all sizes of screen and can be positioned anywhere on the pole.
Handy protective lanyard for the PK Pro monitor.
As the monitor is often hand held during use rather than being mounted on the pole it can be useful to have a safe place to keep it while concentrating on other matters during the site visit.
The lanyard can be worn around the neck and has a transparent holder attached which will keep the monitor safe and while still being usable.
Lanyard fits both variations of the monitor.
PK Telescopic Pole Camera Mount
Standard pole camera mount to fit our pro telescopic camera poles complete with standard 1/4" camera mount thread.
PK Telescopic Pole Camera Mount Adjustable
Special pole camera mount to fit our pro telescopic camera poles featuring adjustable head complete with standard 1/4" camera mount thread.
As supplied with our PK NV Camera.
PK Universal Mount
The PK Universal Camera Mount will fit our camera poles and other poles too such as those from the window and gutter cleaning industries. It will screw down to fit various pole diameters from 15mm to a maximum of 32mm.
It features standard 1/4" camera mount thread and also has a full 180 degree adjustment for the camera.
PK Phone Top Mount
Some of our customers wish to use their phone as the camera itself and for that reason we supply the PK Phone Top Mount. The mount will fit most phones and extends to an opening width of 90mm.
In most cases our dedicated cameras are better utilised on the top of the pole as they tend to be lighter (and less expensive!) than most mobile phones but in some instances using your phone in video mode to record from the top of the pole will work just as well although obviously you cant be quite as accurate as you wont be able to see what is being recorded until you watch it back after.
In-car cigar charger for use in the car or van etc, ideal if you need to charge the kit up on the move.
Please select your model of PK when ordering to ensure you receive the correct adapter.
Booster Battery (Mobile Charger)
If you are using the system for much of the day then you may find the booster battery handy.
Portable light-weight lithium ion battery, on a full charge will work all day long. Can be used to power the equipment on location or simply to charge them when you are away from a power socket.
Please select your model of PK when ordering to ensure you receive the correct adapter. This will fit both the camera and the monitor but can only charge/power one at a time.
Spare or replacement wall charger for use with the PK Pro systems. One wall charger is supplied with each camera system which can charge both the camera unit and monitor (but not at the same time).
An extra charger is ideal if you want to charge both units at once or would just like a spare.
Wall charger for use with the PK Pro systems with European plug or USA plug pattern.
One UK wall charger is supplied with each camera system which can charge both the camera unit and monitor (but not at the same time).
Replacement lithium battery for use with your Pole Camera Monitor.
Grab a spare battery. If you haven't time to recharge simply remove the battery fitted and replace with a fully charged spare one.
If you want to charge your spare battery (above) while you are using the PK system then the separate PK Battery Charger is the answer.
Simply leave your spare battery on charge while you are using the system and it will be ready to install when you need it.
The PK Pro system can be used to take photos and videos of the imagery seen on the LiveView Monitor. To do this a memory card will be required and this slots into the underside of the monitor.
A number of cards are compatible and we currently offer two sizes, one card being capable of taking 200 photos, the other 2000 photos.
Remember too that the memory card can be quickly removed and used in other devices such as a laptop or iPad (using the correct adapter).
Once you've taken your photos or videos with the PK system you will want a quick and easy way of getting them on to your PC or laptop. With the PK card reader simply insert the memory card and you'll have access to all your files instantly.
The card reader connects to your laptop or PC via a USB connector (included).
Useful cable if you want to view your images and videos on a big screen or TV directly from the PK Monitor.
Simply plugs into your TV's AV input sockets and into the av-output socket on the PK Monitor. You can find the TV output option on the Monitor itself in the settings menu.
Very useful lead for connecting the PK Monitor to your computer.
Simply plug the cable in and download the photos and videos from your inspections. Compatible with all PC computers and Macs.
As supplied with the kit as standard.
Travel bag for your telescopic camera pole.
Great bag for storing your pole in and to keep it protected during transportation. Keep your pole safe and dry.
Made from heavy duty nylon with drawstring closer. One size fits all.
PK Pro Travel Case
Pro Travel Case for your camera equipment.
Lightweight but heavy duty case to fit your PK Pro camera system with room for accessories too. Ideal case to keep kit protected during transportation and for storage when not in use.
Made from aluminum. Style may vary from image.
Handy Lens Adjuster for the PK Pro Camera.
Pins locate in the fittings on the lens allowing you to adjust as required.
PK Light Holder (with optional Light)
Our PK NightVision Camera is the the best for inspections in low light and darkness but if you are using a different camera and wish to have an additional light source too then this is ideal.
Its available with or without a light and so if you which to use your own the mount will fit most styles of torches and maglites, ideally keep them under 150g.
The PK Pro Telescopic Camera Poles are designed to be lightweight and very portable however if you plan to use your pole in a single location for a period of time then this heavy weight base stand may be useful.
Its metal construction may be enough to leave the pole free standing (depending on pole choice) but you can also weight it down using the flat panel base. Base supplied as standard with our Elevate Camera system.
PK Pro Cage Mount. Brand new mount for the PK Pro Camera, Simply slide your camera into the new cage and tighten to secure.
Original PK Mount Base. Pre drilled for PK Mount and PK Adjustable mount fittings.
Pack of 2.
Replacement rubber bung as supplied with the PK Telescopic Poles.
If you need a spare or have misplaced your own this part is essential for keeping your pole in check!
By owning a PK Pole Camera you can become a member of PK Associates. This is a database of professionals that own and use telescopic survey cameras for anything from roof inspections to low level aerial photography.
Membership is a great way to grow your business as it gives you access to leads for work and jobs that require the use of a pole camera and these are designated by area. If you would like to join simply email us stating the areas you are likely to accept work, along with details of your original order.
Membership is also open to users of other systems but will incur a joining fee of £249.
Elevated mast photography camera, ballcam extendable pole aerial photography, camera pole aerial photography, ballcam telescopic camera pole, aerial telescopic mast, mast survey camera, estate agent photography, camera monopod, camera pole for aerial photo, elevated mast photography camera, extendable pole aerial photography telescopic camera pole, aerial telescopic mast, mast survey camera, estate agent photography, camera monopod, Elevated mast photography camera, ballcam extendable pole aerial photography telescopic camera pole, aerial telescopic mast, mast survey camera, estate agent photography, camera monopods, camera pole for aerial photo
Access to and use of this website is subject to our Terms & Conditions and Privacy Policy
© 4K Systems, 2006-2021. All rights reserved. 4K Systems is a member of the 4K Group and part of Cloud39 Ltd.